Electronic Device Specialist II (EDSII) in Kent, WA at Carlisle Interconnect Technologies

Date Posted: 1/12/2018

Job Snapshot

  • Employee Type:
    Full-Time
  • Location:
    Kent, WA
  • Job Type:
    Manufacturing
  • Experience:
    Not Specified
  • Date Posted:
    1/12/2018

Job Description

SUMMARY

Under limited supervision, performs a wide variety of complex Medical assembly operations accurately.



ESSENTIAL JOB FUNCTIONS

* Complete the assembly of Medical Devices by means of acceptable processing. This includes basic and Fine wire stripping, shield preparation, and crimping
* Utilize hand tools and automated machines and components in conjunction with customer drawings parts list, bill of materials, wire diagrams, schematics, tables and work instructions
* Lean Manufacturing knowledge
* Build complex assemblies using standard work documents to a high level of quality and efficiency
* Operate metal hardware cleaning equipment - Ultrasonic Cleaner and Vapor Degreaser
* Electrically Test cable assemblies using Cirrus Test Equipment and adapters
* Thoroughly mask cable assemblies undergoing Parylene Coating
* Demonstrate knowledge required by Medical PCB, Flex, and Circular Connector Training. Medical Twisted Pair Training, Medical Contact Block Loading Training, and Test & Measurement Training
* Diligent in working to all required ESD Procedures
* Accurately record data on Traveler Tags for Critical to Quality processes
* Operate Ovens as required
* Operate Water Leak Test
* Solder assemblies using Microscope or Mantis Scope equipment
* Ability to splice jumper wires specific to product guides
* Assemble Coaxial Copper Grounding specific to product guides
* Ability to perform a 45 Degree Coaxial Shield Termination specific to product guides
* Apply UV, Heat, and Ambient cure epoxy to devices
* Operate Pull Test (Tensile Line) specific to product guide
* Operate Specific Customer Supplied test equipment
* Interface with engineers as required
* Demonstrate proficiency in Thermode Set-up and Solder
* Demonstrate proficiency in HDSI Laser Setup and Preparation
* Operate Spot Weld equipment as required
* Identify wires with use of basic color code sequence, wire codes, wire charts or diagrams
* Assist in the training and development of other assemblers as needed
* Complete paperwork clearly and accurately relating to the building of cable assemblies
* Demonstrate a high level of creativity; continuously looking for ways to improve and increase quality and efficiency



*Other duties as required in support of the department and the company*



SUPERVISOR RESPONSIBILITIES

*
• This position does not have any supervisory responsibilities



QUALIFICATIONS

To perform this job successfully, an individual must be able to perform each essential job function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions

* Minimum 6 months as EAI or equivalent

* Maintain active status in the below Carlisle IT Technical training courses:

* Wire Harness Fundamental Modules
* Fine Wire Solder Training
* Medical PCB, Flex, and Circular Connector Training
* Medical Twisted Pair Training
* Medical Contact Block Loading Training
* Tooling Fundamentals (all modules)
* ESD and FOD awareness courses and any other training found to be required
* Kaizen participation 1X yearly, Lean manufacturing workshop training
* Excellent written and communication skills to include following verbal and written instructions using standard work documents
* Demonstrates good judgment and decision making skills
* Ability to work with minimal supervision
* Reliable and flexible to work additional hours on short notice to complete orders and/or special projects to meet customer demands
* Ability to adapt to schedule changes with a positive attitude and be detail oriented
* Understanding of and experience in Lean manufacturing environment
* Ability to maintain assembly precision under high stress situations
* Demonstrate honesty and integrity when internal discrepancies are found



Optional Training: Soldering Fundamentals Modules. If trained and performing work must maintain competency





EDUCATION and/or EXPERIENCE

*
• High school diploma or equivalent (GED)







CERTIFICATES, LICENSES, REGISTRATIONS

Must maintain industry certifications as applicable to position and value stream that is supported. Including but not limited to; IPC-WHMA-A-620, IPC-JSTD-001, IPC-610, IPC-600 and NASA 8739

*
• IPC/WHMA-A-620 CIS Certification (All modules)
*
• J-STD-001 certification or equivalent solder experience (PCB, Flex circuit board, Circular connectors, Through hole, Surface mount, Solder cups, etc.)



LANGUAGE SKILLS

*
• Ability to read, write, speak and understand English



PHYSICAL DEMANDS

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions

*
• Regular sitting, standing and walking throughout the day to accomplish tasks
*
• Occasional sitting
*
• Manual and finger dexterity used regularly with some repetitive finger motions, and required usage of both hands as needed
*
• Lifting and carrying up to 25 pounds, occasionally up to 50 pounds
*
• Specific vision abilities include close and distance vision; able to identify colors, small letters and numbers; hand/eye coordination, depth perception and able to adjust focus
*
• Hearing and speaking
*
• Other conditions may include frequent reaching, stretching, pushing, pulling, pinching, grasping, gripping, and crouching or stooping



WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Work is performed in a normal office environment with minimal physical risks involved. The noise level in the work environment is low to moderate



ENVIRONMENTAL POLICY

Carlisle Interconnect Technologies is dedicated to identifying and reducing the environmental impact of its operations, activities, and products. It is our commitment to comply with all applicable laws and other regulatory requirements concerning the environment. We are committed to preventing pollution and continually improving our environmental performance in all of our global operations. This will be achieved through a comprehensive Environmental Management System that provides the framework for setting and reviewing environmental objectives and targets of Carlisle Interconnect Technologies



PERSONAL PROTECTIVE EQUIPMENT REQUIREMENTS

*
• Clear ANSI Z87.1 safety rated glasses are required for the job when in the manufacturing areas







EXPORT COMPLIANCE DISCLAIMER

This position includes access or potential access to ITAR and/or EAR technical data. Therefore, candidates will need to qualify as a US Person which is defined as a US Citizen, or a Permanent Resident (Green Card Holder)



TRAVEL

0 - 5%

SUMMARY

Under limited supervision, performs a wide variety of complex Medical assembly operations accurately.



ESSENTIAL JOB FUNCTIONS

* Complete the assembly of Medical Devices by means of acceptable processing. This includes basic and Fine wire stripping, shield preparation, and crimping
* Utilize hand tools and automated machines and components in conjunction with customer drawings parts list, bill of materials, wire diagrams, schematics, tables and work instructions
* Lean Manufacturing knowledge
* Build complex assemblies using standard work documents to a high level of quality and efficiency
* Operate metal hardware cleaning equipment - Ultrasonic Cleaner and Vapor Degreaser
* Electrically Test cable assemblies using Cirrus Test Equipment and adapters
* Thoroughly mask cable assemblies undergoing Parylene Coating
* Demonstrate knowledge required by Medical PCB, Flex, and Circular Connector Training. Medical Twisted Pair Training, Medical Contact Block Loading Training, and Test & Measurement Training
* Diligent in working to all required ESD Procedures
* Accurately record data on Traveler Tags for Critical to Quality processes
* Operate Ovens as required
* Operate Water Leak Test
* Solder assemblies using Microscope or Mantis Scope equipment
* Ability to splice jumper wires specific to product guides
* Assemble Coaxial Copper Grounding specific to product guides
* Ability to perform a 45 Degree Coaxial Shield Termination specific to product guides
* Apply UV, Heat, and Ambient cure epoxy to devices
* Operate Pull Test (Tensile Line) specific to product guide
* Operate Specific Customer Supplied test equipment
* Interface with engineers as required
* Demonstrate proficiency in Thermode Set-up and Solder
* Demonstrate proficiency in HDSI Laser Setup and Preparation
* Operate Spot Weld equipment as required
* Identify wires with use of basic color code sequence, wire codes, wire charts or diagrams
* Assist in the training and development of other assemblers as needed
* Complete paperwork clearly and accurately relating to the building of cable assemblies
* Demonstrate a high level of creativity; continuously looking for ways to improve and increase quality and efficiency



*Other duties as required in support of the department and the company*



SUPERVISOR RESPONSIBILITIES

*
• This position does not have any supervisory responsibilities



QUALIFICATIONS

To perform this job successfully, an individual must be able to perform each essential job function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions

* Minimum 6 months as EAI or equivalent

* Maintain active status in the below Carlisle IT Technical training courses:

* Wire Harness Fundamental Modules
* Fine Wire Solder Training
* Medical PCB, Flex, and Circular Connector Training
* Medical Twisted Pair Training
* Medical Contact Block Loading Training
* Tooling Fundamentals (all modules)
* ESD and FOD awareness courses and any other training found to be required
* Kaizen participation 1X yearly, Lean manufacturing workshop training
* Excellent written and communication skills to include following verbal and written instructions using standard work documents
* Demonstrates good judgment and decision making skills
* Ability to work with minimal supervision
* Reliable and flexible to work additional hours on short notice to complete orders and/or special projects to meet customer demands
* Ability to adapt to schedule changes with a positive attitude and be detail oriented
* Understanding of and experience in Lean manufacturing environment
* Ability to maintain assembly precision under high stress situations
* Demonstrate honesty and integrity when internal discrepancies are found



Optional Training: Soldering Fundamentals Modules. If trained and performing work must maintain competency





EDUCATION and/or EXPERIENCE

*
• High school diploma or equivalent (GED)







CERTIFICATES, LICENSES, REGISTRATIONS

Must maintain industry certifications as applicable to position and value stream that is supported. Including but not limited to; IPC-WHMA-A-620, IPC-JSTD-001, IPC-610, IPC-600 and NASA 8739

*
• IPC/WHMA-A-620 CIS Certification (All modules)
*
• J-STD-001 certification or equivalent solder experience (PCB, Flex circuit board, Circular connectors, Through hole, Surface mount, Solder cups, etc.)



LANGUAGE SKILLS

*
• Ability to read, write, speak and understand English



PHYSICAL DEMANDS

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions

*
• Regular sitting, standing and walking throughout the day to accomplish tasks
*
• Occasional sitting
*
• Manual and finger dexterity used regularly with some repetitive finger motions, and required usage of both hands as needed
*
• Lifting and carrying up to 25 pounds, occasionally up to 50 pounds
*
• Specific vision abilities include close and distance vision; able to identify colors, small letters and numbers; hand/eye coordination, depth perception and able to adjust focus
*
• Hearing and speaking
*
• Other conditions may include frequent reaching, stretching, pushing, pulling, pinching, grasping, gripping, and crouching or stooping



WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Work is performed in a normal office environment with minimal physical risks involved. The noise level in the work environment is low to moderate



ENVIRONMENTAL POLICY

Carlisle Interconnect Technologies is dedicated to identifying and reducing the environmental impact of its operations, activities, and products. It is our commitment to comply with all applicable laws and other regulatory requirements concerning the environment. We are committed to preventing pollution and continually improving our environmental performance in all of our global operations. This will be achieved through a comprehensive Environmental Management System that provides the framework for setting and reviewing environmental objectives and targets of Carlisle Interconnect Technologies



PERSONAL PROTECTIVE EQUIPMENT REQUIREMENTS

*
• Clear ANSI Z87.1 safety rated glasses are required for the job when in the manufacturing areas







EXPORT COMPLIANCE DISCLAIMER

This position includes access or potential access to ITAR and/or EAR technical data. Therefore, candidates will need to qualify as a US Person which is defined as a US Citizen, or a Permanent Resident (Green Card Holder)



TRAVEL

0 - 5%

Equal Opportunity Employer Minorities/Women/Protected Veterans/Disabled